As a safety feature, and to prevent messy leaks, your dishwasher won’t start if the door isn’t properly shut. How do you fix a dishwasher door that won’t close? First, make sure that loaded items aren’t preventing the dishwasher racks from sliding in completely. You may need to rearrange any dishware that causes the racks to protrude. Determine what to do if your Maytag dishwasher door won’t close with these troubleshooting tips.

Sometimes a simple adjustment or DIY fix is all that’s needed when your Maytag dishwasher door won’t close. In other cases, a part malfunction may require a repair. We’ll help determine the right solution by pinpointing the problem.

Sometimes items that are protruding from a dishwasher rack or silverware basket can keep it from sliding in completely. The rack then prevents the door from closing properly. Make sure items in the dishwasher racks and silverware basket allow the racks to slide in completely, enabling the door to close. The  best way to load a dishwasher avoids overcrowding so items don’t protrude from the racks.

The dishwasher must be level for a variety of functions to operate properly. If your  dishwasher doesn’t drain completely , leaks or the door won’t close, the dishwasher’s legs may not be level with the floor. Use a leveling tool to check that the dishwasher is level. If it isn’t, you can adjust the front legs with a socket wrench to make sure they sit squarely on the floor.

A dishwasher’s door gasket provides a tight seal when the door closes, preventing leaks and enabling the door to align properly. Over time, the gasket can tear, loosen or crack, resulting in the dishwasher door not closing correctly. A damaged gasket can also cause leaking while the dishwasher is in use.

Inspect the gasket, looking for signs of damage. If the gasket is ripped or cracked, it should be replaced so the door can close properly.

A dishwasher door latch secures the door when it’s closed. It also pushes in the door switch, signaling to the dishwasher that the door is shut so a wash cycle can begin. While a door latch can crack or chip, it’s more likely to become misaligned over time. When this happens, the dishwasher latch won’t close properly, and the door won’t be completely shut, prohibiting a cycle from starting.

Are you wondering, “how do I fix the latch on my Maytag dishwasher?” If it’s out of alignment, loosen the screws, reposition the latch, and secure the screws, so it stays in the proper position. However, if the latch appears damaged or its electrical connection with the door switch is faulty, it needs to be replaced.

Loose or damaged hinges could be another reason your Maytag dishwasher door won’t close properly. The hinge on either side of the door attaches to the dishwasher frame, enabling the door to open and close smoothly. If one or both of the hinges is damaged or loose, the door won’t close correctly.

Test the hinges by opening and closing the door. If a hinge wobbles or comes out of alignment while the door is in motion, it needs to be tightened with a screwdriver. However, if either hinge appears rusted or bent, it should be replaced.

Maytag dishwasher door won’t close even after trying these tips? It may be time for a professional service to assess the problem. Call Fix Appliance Repair for the best  dishwasher repair Birmingham.